Sústružnícky nôž čelný SSDCN , AKKO
Varianta:
12x12mm / SCMT 09T3 |
Na dotaz
|
53,36 € s DPH |
16x16mm / SCMT 09T3 |
Skladom
(1x)
|
59,71 € s DPH |
16x16mm / SCMT 1204 |
Skladom
(2x)
|
59,71 € s DPH |
20x20mm / SCMT 09T3 |
Skladom
(1x)
|
62,25 € s DPH |
20x20mm / SCMT 1204 |
Skladom
(2x)
|
62,25 € s DPH |
25x25mm / SCMT 1204 |
Skladom
(1x)
|
64,80 € s DPH |
Zaujíma vás o produkte viac?
Nemôžete nájsť žiadne informácie? Alebo si nie ste istí výberom? Opýtajte sa nás
- Značka:
- AKKO
- Záruka:
- 24 mesiace
Informácie o produkte
Front holder for exchangeable inserts / knife for external turning,
fastening with a screw
Clamping dimensions: according to the selected variant
Marking of plates that fit into the holder: according to the selected variant
Additional dimensions and list of spare parts - see attached catalog sheet.
A key for changing the plate is supplied with the goods.
The plate is not part of the package, it can be purchased separately.
General information on choosing a suitable holder:
Type "S" holders - with screw clamping are suitable for normal to finishing operations. They are suitable for smaller removals of material. The inserts for these holders have a positive back of the insert, which enables a sharper geometry of the inserts and thus the possibility of achieving a better surface quality.
P, "M" , "T" , "C" and "D" type holders with thumb or clamp clamping are suitable for normal to roughing operations - they have higher rigidity. The inserts for these holders have a negative (straight) back of the insert, thanks to which the inserts do not break / deform so much and it is possible to rough them and machine better / longer even harder-to-machine materials.
Clamping dimensions: according to the selected variant
Marking of plates that fit into the holder: according to the selected variant
Additional dimensions and list of spare parts - see attached catalog sheet.
A key for changing the plate is supplied with the goods.
The plate is not part of the package, it can be purchased separately.
General information on choosing a suitable holder:
Type "S" holders - with screw clamping are suitable for normal to finishing operations. They are suitable for smaller removals of material. The inserts for these holders have a positive back of the insert, which enables a sharper geometry of the inserts and thus the possibility of achieving a better surface quality.
P, "M" , "T" , "C" and "D" type holders with thumb or clamp clamping are suitable for normal to roughing operations - they have higher rigidity. The inserts for these holders have a negative (straight) back of the insert, thanks to which the inserts do not break / deform so much and it is possible to rough them and machine better / longer even harder-to-machine materials.
Varianty
Ako nás vidia zákazníci?
Super obchod. Velký výběr sortimentu a také rychlost dodání (do dvou dnů od objednávky-poštou).
"Super obchod. Velký výběr sortimentu a také rychlost dodání (do dvou dnů od objednávky-poštou)."
Široký sortiment
Dobrá cena
Rychlá doprava
"DOPORUČUJI!"
Doprava zadarmo
Pre viac informácií o podmienkach dopravy zadarmo kliknite tu.
Rýchle odoslanie
Dostanete objednávku zo skladu do 1 pracovného dňa.
Predajňa
Väčšina tovaru je dostupná v predajni.
Individuálne zľavy
Ste verný zákazník alebo sa ním chcete stať? Kontaktujte nás!